3200 Series Z Frame Conveyors

3200 Series Z Frame Conveyors

Nose Over

Flat Belt End Drive Specifications

  • Loads up to 400 lbs* (181 kg)
  • Belt speeds to 600 ft/min (183 m/min)
  • Belt widths: 3.75″ (95 mm) to 48″ (1,219 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 40′ (12,192 mm)
  • Fixed angle, 5˚, 10˚, 15˚, and 20˚
  • 1.62″ (41 mm) of belt take-up on conveyors up to 20′ long
  • 3.24″ (82 mm) of belt take-up on conveyors over 20′ long
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Nose-over configuration
  • V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications

Sidewall Cleated Belt End Drive Specifications

  • Loads up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Available with 30 mm and 40 mm cleat and sidewall heights
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments

Cleated Belt End Drive Specifications

  • Loads capacity up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Cleats available from 0.24″ (6 mm) to 5.9″ (150 mm) high
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments

Horizontal to Incline

Cleated Belt End Drive Specifications

  • Loads capacity up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Cleats available from 0.24″ (6 mm) to 5.9″ (150 mm) high
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments

Sidewall Cleated Belt End Drive Specifications

  • Loads up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Available with 30 mm and 40 mm cleat and sidewall heights
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments

z frame

Z Frame

Cleated Belt End Drive

  • Loads capacity up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Cleats available from 0.24″ (6 mm) to 5.9″ (150 mm) high
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments

Sidewall Cleated Belt End Drive

  • Loads up to 100 lbs* (45 kg)
  • Belt speeds up to 275 ft/min (83.8 m/min)
  • Belt widths: 8″ (203 mm) to 24″ (610 mm)
  • Conveyor lengths: 4′ (1,219 mm) to 25′ (7,620 mm)
  • Fixed angle, 25˚, 30˚, 45˚ and 60˚
  • Available with 30 mm and 40 mm cleat and sidewall heights
  • 1.62″ (41 mm) of belt take-up
  • 3″ (76 mm) diameter drive pulley turns approximately 9.7″ (246 mm) of belt per revolution
  • Z-Frame, nose-over and horizontal-to-incline configurations
  • V-guided belts eliminate tracking adjustments