Benefits of 7600 AquaPruf Z-Frame Conveyor:

Specifications

  • Available in flat and cleated belts
  • Load: 20 lbs/square foot of belt (90 kg/m2)
  • Belt Widths: 6” (152 mm) to 24” (610 mm)
  • Section Lengths: 24” (610 mm) to 20’ (6.1 m)
  • Total Conveyor Lengths: up to 38′ (11.6 m)
  • Belt speed: 233 ft/min maximum (71 m/min)
  • 5°, 10° and 15° Fixed Angle Modules standard
  • 3.5” (89 mm) diameter drive roller with cast-on Urethane lagging
  • UHMW Wear strip bed plate
  • Continuous TIG welded 304 stainless steel frame
  • #4 Polish on all outside surfaces
  • Bearing material is 400 stainless steel
  • Bearing lubricant is H1 type FDA lubricant
  • FDA approved belting and plastic components

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel

Features & Benefits

  • Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10’ (3,048 mm) long consist of multiple sections which are bolted together.
  • Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
  • Belt tensioning mechanism uses Acme threads for easy cleaning and is externally mounted to the frame with adequate clearances for cleaning.
  • The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  • Return Belt Supports are 4″ UHMW Rollers and are easily removed without tools for effective cleaning.
  • Drive spindle is Cast-On Urethane Lagging for increased load capacity. Spindle has groove for V-guided belts for optimum performance.
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Nose bar idler ends (optional) are available in 1″ and 1 7/8″ for small product transfers.
  • Belt lifters (optional) lift belt from wear strips / bed plate by simply pulling an external lever for fast access and effective cleaning.
  • Belt scraper (optional) removes build up and adjusts easily for each application. Features tool-less disassembly/assembly for cleaning of parts.
  • Solid bed plate (optional) is stainless steel and locates on UHMW strips for delicate / fragile products.

Accessories

Guides
Transfers
Mounting & Hardware
Photo Eye Kits
Drip Pans
Infeed Chute
Angled Hopper

Manuals & Literature

Engineering ManualsPagesFile Size
Sanitary Overview528.34 MB

 

 LiteraturePagesFile Size
 Sanitary Conveyors Line Card 65.97 MB
 Dorner Sanitary Full Spec Rev. D 22425.7 MB
Dorner 7600 Ultimate Full Spec Rev. D 2614 KB
 AquaPruf Accessories Brochure 3 402 KB