GES-25-UA Flat Belt Conveyor


The central drive of the GES-25-UA can be positioned anywhere along the length of the conveyors frame. Both ends are left free, so that an integration in existing product lines becomes easy.

These ends can either have a knife edge with only 8 mm diameter or they are equipped with rollers of 30mm diameter. This roller can additionally have a flip-up system that allows very easy cleaning under the belt.

The GES-25-UA, like all stainless steel conveyors from GEPPERT-Band, is completely made of stainless steel. The patented Clean-Tec system makes it the ideal solution for chemical, pharmaceutical and food-stuff applications.

The very high demands for cleanliness and hygiene in these areas are fully met, because all moving parts and open threads on the mechanics of the adjustment for the belt are sealed inside the conveyor. Therefore almost no contamination can accumulate on these parts.

On the photo above the GES-25-UA is shown with two double uprights in stainless steel. Shorter versions can also be equipped with a single column upright. That single column upright is also available in a version on security rollers with breaks.

Technical Specifications and Accessories

Belt widths:
50, 100, 150, 200, 250, 300, 350 and 400 mm.

Distance between axes / length:
500 to 6,000 mm. All intermediate lengths are possible.

Drive with constant belt speed:
v = approx. 4,0 / 7,3 / 11,0 / 14,7 / 22,0 or 31,4 m/min.
Other belt speeds upon request. Connection for 220/240 – 380/415 V, 50 Hz. Protection type IP 65. This drive can be supplied ready for connection with a motor protection switch with an emergency switch, and with a 2 meter supply cable and CEE plug. Protection type IP 65.

Drive with infinitely adjustable belt speed:
v = approx. 1,6-5,6 / 2,9-10,3 / 4,4-15,4 / 5,9-20,5 / 8,8-30,8 or 12,6-44,0 m/min.
Other belt speeds upon request. The drive is supplied together with a digital frequency regulator that is ready to be plugged to 240 V 50 Hz and has a protection type of IP 65. The frequency controller incorporates a digital motor protection switch.

Geared motor position:
The geared motor can be positioned anywhere along the frame of the conveyor. It can be turned around its flange in steps of 90°.

Total belt load:
up to 20 kg possible. Higher belt loads can be handled on request.

GES-25-UA Operating Manual